Description

Offered for sale is a truly exceptional example of Watson’s Edinburgh Student’s Stand-H model microscope in brass – it dates to around 1927 based on its serial number 40166.  It’s marked W. Watson & Sons Ltd and post-dates the firm’s move to limited company status which occurred way back in 1908.  It was originally retailed by Watson sales agents B. E. Dickson of Belfast, with an inscription to this effect on the main optical tube.  This is example in amazing condition with no signs of wear that I can see anywhere on the instrument.  The lacquered brass-work is spotless, which is quite amazing for an instrument that’s 99 years old and counting.

The Edinburgh pattern model of microscope was produced by Watson between 1887 and around 1945; its long production run giving us a firm clue regarding just how good this model of microscope was in its heyday and over that long production cycle Watson regularly updated and improved the model, so what you see here is a mid-production cycle example.  The Edinburgh stand was originally developed by Watson in collaboration with a professor and lecturer in bacteriology at the University of Edinburgh, hence the Edinburgh designation. With its signature rear cross-member giving that classic “H” look and nice lacquered brass-work, the Edinburgh H is a fine example of British optical engineering with a design and style essentially dating back to the Victorian era. This example must be one of the finest there is surviving from 1927.

Turning to the technical details, the construction is a cast brass tripod in black paint finish with bun feet.  From the tripod rise twin uprights to a pivot with tension adjustment available if required.  The upper limb is also in black-painted brass, with stage bolted to the limb and the sub-stage fittings attach to the underside of the stage.  The coarse focus is via rack and pinion with good smooth action that holds in position on adjustment and there’s also tension adjustment for the coarse focus pinion which is a good additional feature to have.  Fine focus is operated via a separate brass thumb-wheel located at the rear of the upper limb which operates an internal lever system acting against sprung resistance.  The focusing technique being to achieve near focus with the coarse thumb-wheels, then fine-tune with the single rear thumb-wheel, which only has a fairly small range of movement via its vernier screw mechanism.

With the optics, this Watson microscope comes fitted with a period graduated brass eyepiece draw-tube inside a wide-body brass main optical tube which was an option for photo-micography and there’s three vintage Watson eyepieces that with adequate illumination produce very good bright images:

– 5x magnification
– 8x magnification
– 14x magnification Holos with integral draw-tube

It’s also got four period objectives in total and a triple turret which rotates with a positive feel as the objectives slot into their viewing positions.  The objectives are as follows:

– 2/3rds inch brass para by Watson – 10x magnification
– Ernst Leitz No. 6 in brass – approx 40x magnification
– 1/6th inch in brass para by Watson – 40x magnification
– 1/12th inch utility brass by Watson – approx 100x magnification – requires oil immersion

Overall therefore, the range of magnification available with this Watson Edinburgh-H ranges from about 50x with the lowest power lens combination, up to a theoretical 1,400x with the highest power combination and oil immersion when using the 1/12th inch objective.

The fully mechanical stage is an original Watson design in brass, with twin thumb-wheel adjusters on the right hand side of the stage that have just the right positive feel and give a good range of x/y sample movement.  It’s fitted with specimen clips that are fine for holding slides steady during inclined viewing and when the axes are being moved around.  The x/y controls also offering good control of specimen positioning, which is a real advantage for higher magnification work.  

Turning to the sub-stage, we have a technical sub-stage with an Abbe-type condenser in a brass ring-mount with centering and height adjustment.  The condenser also has a swing-out filter carrier and working iris with smooth action.  The whole condenser assembly also swings out for maintenance as shown.

For lighting there’s the original brass plano-concave mirror which attaches to a socket on the underside of the limb tailpiece with gimbal for adjustment.  The mirror silvering is in very good condition to both sides.

The instrument’s controls and friction surfaces have been inspected and did not require any additional lubrication, operating smoothly with a nice feel to all controls.  This example presents amazingly well while being used as a desk-top instrument and will also display perfectly in a library of home office setting.

There’s the original Watson storage case with this example, with wooden carry-handle and internal racking.  The lock and key are both present, which is always nice to have  Overall, the case has just the right aged look with the right level of patination and a lovely exterior sheen, so complements the antique microscope perfectly. Note shrinkage crack to rear panel, which is not unusual for Watson cases of this vintage.

Owing to the weight and delicacy of this Edinburgh-H microscope and its case, it will be partially dismantled, very well wrapped for shipping and dispatched by insured courier upon receipt of cleared funds.  UK shipping will be by Royal Mail Special Delivery in view of the required insurance value – this explains the quoted shipping cost.

Thanks for looking.